Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
|SmartSolar Charge Controller||MPPT 75/15|
|Battery Voltage||12/24V Auto Select|
|Rated Charge Current||15A|
|Nominal PV Power, 12V 1a,b)||220W|
|Nominal PV Power, 24V 1a,b)||440W|
|Max. PV Short Circuit Current 2)||15A|
|Automatic Load Disconnect||Yes, maximum load 15A|
|Max. PV Open Circuit Voltage||75V|
|Self-consumption||12V: 25mA 24V: 15mA|
|Charge Voltage ‘absorption’||14.4V / 28.8V (adjustable)|
|Charge Voltage ‘equalization’||16.2V / 32.4V (adjustable)|
|Charge Voltage ‘float’||13.8V / 27.6V (adjustable)|
|Charge Algorithm||multi-stage adaptive or user defined algrithm|
|Temperature Compensation||-16mV / ºC resp. -32mV / ºC|
|Max. Continuous Load Current||15A|
|Low Voltage Load Disconnect||
11.1V / 22.2V or 11.8V / 23.6V or Battery Life algorithm
|Low Voltage Load Reconnect||
13.1V / 26.2V or 14V / 28V or Battery Life algorithm
|Protection||Battery reverse polarity (fuse) / Output short circuit / Over temperature|
|Operating Temperature||-30 to +60°C (full rated output up to 40°C)|
|Power terminals||6 mm² / AWG10|
|Protection category||IP43 (electronic components), IP22 (connection area)|
|Dimensions (H x W x D)||100 x 113 x 40 mm|