- 3mm thick solar panel for charging 12V batteries.
- A neat lightweight battery maintenance solar panel with no glass to break.
- The solar cells are “A” grade American.
- Installation of the panel can be done permanently by using an adhesive to stick the panel down. The mounting surface does not have to be completely flat as the panel is able to curve in a semi flexible manner to adhere to most surfaces.
- The wiring block is on the front of the panel so the panel can be installed flat to a surface.
- This size panel is great for battery maintenance. A small regulator is advised to be used with this panel as it will stop charging when the battery is fully charged.
- It will reduce the problems you have with your battery going flat when in storage.
- This panel can be connected to a dual battery solar controller and charge two 12V batteries at the same time.
- This panel can also be used to maintain any 12V battery when hooked to a suitable 12V regulator.
|Maximum power (Pmax)
|Maximum power voltage (Vmp)
|Maximum power current (Imp)
|Open circuit voltage (Voc)
|Short circuit voltage (Isc)
|Maximum system voltage
|465 x 277 x 3mm
Please note there is protective plastic covering the panel in the photos.
This has to be removed once installed.